Structural Composite, Nanocomposite, Conductive Composite, Insulating Composite, Energy Composite

2006. 03 ~ 2010. 02│Seoul National University│Materials Science and Engineering│M.S. & Ph.D.
2002. 03 ~ 2006. 02│Hanyang University│Applied Chemical Engineering Division, Molecular system Engineering│B.S.

2019. 02 ~ Present│Jeonbuk National University│Polymer-Nano & Textile Engineering Division│Dean of Division
2017. 09 ~ Present│Jeonbuk National University│Organic Materials & Fiber Engineering│Assistant Professor
2013. 09 ~ 2015. 08│UST(University of Science and Technology)│Assistant Professor
2012. 02 ~ 2017. 08│KIST(Korea Institute of Science and Technology) Jeonbuk│Senior Researcher
2010. 04 ~ 2012. 01│Seoul National University Joint Institute of New Materials│Post-Doc.

Journal Paper
1.
Jaehyun Cho, Hyeseong Lee, Ki-Ho Nam, Hyeonuk Yeo, Cheol-Min Yang, Dong Gi Seong, Doojin Lee, Seong Yun Kim*. Enhanced electrical conductivity of polymer nanocomposite based on edge-selectively functionalized graphene nanoplatelets. Composites Science and Technology (IF: 6.309) 2020, 189, 108001.
2.
Dong Woo Kim, Yoon Sang Kim, Yong Chae Jung, Seong Yun Kim, Jong Man Song, Minkook Kim, Jaewoo Kim. Development of a continuous manufacturing process for self-reinforced composites using multi-step highly drawn polypropylene tapes. Polymer (IF: 3.771) 2020, 191, 122267.
3.
Ji-un Jang, Ji Eun Cha, Seung Hwan Lee, Jaewoo Kim, Beomjoo Yang, Seong Yun Kim*, Seong Hun Kim. Enhanced electrical and electromagnetic interference shielding properties of uniformly dispersed carbon nanotubes filled composite films via solvent-free process using ring-opening polymerization of cyclic butylene terephthalate. Polymer (IF: 3.771) 186, 122030.
4.
Seong Yun Kim, Ji-un Jang, Bezawit F. Haile, Min Wook Lee, Beomjoo Yang. Swarm intelligence integrated micromechanical model to investigate thermal conductivity of multi-walled carbon nanotube-embedded cyclic butylene terephthalate thermoplastic nanocomposites. Composites Part A (IF: 6.282) 2020, 128, 105646.
5.
Han Gyeol Jang, Beomjoo Yang, Myung-Seob Khil, Seong Yun Kim*, Jaewoo Kim. Comprehensive study of effects of filler length on mechanical, electrical, and thermal properties of multi-walled carbon nanotube/polyamide 6 composites. Composites Part A (IF: 6.282) 2019, 125, 105542.
6.
Ji-un Jang, Hun Su Lee, Jae Woo Kim, Seong Yun Kim*, Seong Hun Kim, Inwoog Hwang, Byung Joo Kang, Myung Koo Kang. Facile and cost-effective strategy for fabrication of polyamide 6 wrapped multi-walled carbon nanotube via anionic melt polymerization of ε-caprolactam. Chemical Engineering Journal (IF: 8.355) 2019, 373, 251-258.
7.
Hyeseong Lee, Doojin Lee, Jaehyun Cho, Young-O Kim, Soonho Lim, SangJun Youn, Yong Chae Jung, Seong Yun Kim*, Dong Gi Seong. Super-insulating, flame-retardant, and flexible poly(dimethylsiloxane) composites based on silica aerogel. Composites Part A (IF: 6.282) 2019, 123, 108-113.
8.
Min Park, Hyeseong Lee, Ji-un Jang, Jong Hyuk Park, Chai Hwan Kim, Seong Yun Kim*, Jae Woo Kim. Phenyl glycidyl ether as an effective noncovalent functionalization agent for multiwalled carbon nanotube reinforced polyamide 6 nanocomposite fibers. Composites Science and Technology (IF: 6.309) 2019, 177, 96-102.
9.
Young Nam Kim, Young-O Kim, Seong Yun Kim, Min Park, Beomjoo Yang, Jaewoo Kim, Yong Chae Jung. Application of supercritical water for green recycling of epoxy-based carbon fiber reinforced plastic. Composites Science and Technology (IF: 6.309) 2019, 173, 66-72.
10.
Jaehyun Cho, Han Gyeol Jang, Seong Yun Kim*, Beomjoo Yang. Flexible and coatable insulating silica aerogel/polyurethane composites via soft segment control. Composites Science and Technology (IF: 6.309) 2019, 171, 244-251.
11.
Dong Gi Seong, Shino Kim, Doojin Lee, Jin Woo Yi, Sang Woo Kim, Seong Yun Kim*. Prediction of defect formation during resin impregnation process through a multi-layered fiber preform in resin transfer molding by a proposed analytical model. Materials (IF: 2.972) 2018, 11, 2055.
12.
Hyun Su Kim, Ji-un Jang, Hyeseong Lee, Seong Yun Kim*, Seong Hun Kim, Jaewoo Kim, Yong Chae Jung, Beom Joo Yang. Thermal management in polymer composites: A review of physical and structural parameters. Advanced Engineering Materials (IF: 2.906) 2018, 20, 1800204.
13.
Young-Gon Kim, Hyun Su Kim, Sung Mu Jo, Seong Yun Kim*, B.J. Yang, Jaehyun Cho, Sungho Lee, Ji Eun Cha. Thermally insulating, fire-retardant, smokeless and flexible polyvinylidene fluoride nanofibers filled with silica aerogels. Chemical Engineering Journal (IF: 8.355) 2018, 351, 473-481.
14.
Ji-un Jang, Hyeong Cheol Park, Hun Su Lee, Myung-Seob Khil, Seong Yun Kim*. Electrically and thermally conductive carbon fibre fabric reinforced polymer composites based on nanocarbons and an in-situ polymerizable cyclic oligoester. Scientfic Reports (IF: 4.011) 2018, 8, 7659.
15.
Min Park, Jong Hyuk Park, B.J. Yang, Jaehyun Cho, Seong Yun Kim*, Inhwa Jung. Enhanced interfacial, electrical, and flexural properties of polyphenylene sulfide composites filled with carbon fibers modified by electrophoretic surface deposition of multi-walled carbon nanotubes. Composites Part A (IF: 6.282) 2018, 109, 124-130.
16.
Kyungtae Kim, Yong Chae Jung, Seong Yun Kim*, B.J. Yang, Jaewoo Kim. Adhesion enhancement and damage protection for carbon fiber-reinforced polymer (CFRP) composites via silica particle coating. Composites Part A (IF: 6.282) 2018, 109, 105-114.
17.
Hyeong Min Park, G.M. Kim, Sol Yi Lee, Haemin Jeon, Seong Yun Kim, Minkook Kim, Jae Woo Kim, Yong Chae Jung, B.J. Yang. Electrical resistivity reduction with pitch-based carbon fiber into multi-walled carbon nanotube (MWCNT)-embedded cement composites (IF: 3.169) 2018, 165, 484-493.
18.
Seong Yun Kim, Han Gyeol Jang, Choel-Min Yang, B.J. Yang. Multiscale prediction of thermal conductivity for nanocomposites containing crumpled carbon nanofillers with interfacial characteristics. Composites Science and Technology (IF: 4.873) 2018, 155, 169-176.
19.
Taehee An, Bishweshwar Pant, Seong Yun Kim, Mira Park, Soo-Jin Park, Hak-Young Kim. Mechanical and optical properties of electrospun nylon-6,6 nanofiber reinforced cylci butylene terephthalate composites. Journal of Industrial and Engineering Chemistry (IF: 4.421) 2017, 55, 35-39.
20.
Hyun Su Kim, Jong Hyeok Kim, Woo Young Kim, Hun Su Lee, Seong Yun Kim*, Myung-Seob Khil. Volume control of expanded graphite based on inductively coupled plasma and enhanced thermal conductivity of epoxy composite by formation of the filler network. Carbon (IF: 6.337) 2017, 119, 40-46.
21.
Jaehyun Cho, Ikseong Jeon, Seong Yun Kim, Soonho Lim, Jae Young Cho. Improving dispersion and barrier properties of polyketone/graphene nanoplatelet composites via noncovalent functionalization using aminopyrene. ACS Applied Materials & Interfaces (IF: 7.504) 2017, 9, 27984-27994.
22.
Jaesnag Yu, Ji Eun Cha, Seong Yun Kim*. Thermally conductive composite film filled with highly dispersed graphene nanoplatelets via solvent-free one-step fabrication. Composites Part B (IF: 3.850) 2017, 110, 171-177.
23.
B.J. Yang, Ji-un Jang, Seung-Hyun Eem, Seong Yun Kim*. A probabilistic micromechanical modeling for electrical properties of nanocomposites with multi-walled carbon nanotube morphology. Composites Part A (IF: 3.719) 2017, 92, 108-117.
24.
Hyun Su Kim, Jong Hyeok Kim, Cheol-Min Yang, Seong Yun Kim*. Synergistic enhancement of thermal conductivity in composites filled with expanded graphite and multi-walled carbon nanotube fillers via melt-compounding based on polymerizable low-viscosity oligomer matrix. Journal of Alloys and Compounds (IF: 3.014) 2017, 690, 274-280.
25.
Ji Eun Cha, Seong Yun Kim*, Seung Hee Lee*. Effect of continuous multi-walled carbon nanotubes on thermal and mechanical properties of flexible composite film. Nanomaterials (IF: 2.690) 2016, 6, 182.
26.
Hyun Su Kim, Jung Hyun Na, Yong Chae Jung, Seong Yun Kim*. Synergistic enhancement of thermal conductivity in polymer composites filled with self-hybrid expanded graphite fillers. Journal of Non-Crystalline Solids (IF: 1.825) 2016, 450, 75-81.
27.
Ye Ji Noh, Hyun Su Kim, Bon-Cheol Ku, Myung-Seob Khil*, Seong Yun Kim*. Thermal conductivity of polymer composites with geometric characteristics of carbon allotropes. Advanced Engineering Materials (IF: 1.817) 2016, 18, 1127-1132.
28.
Jaesang Yu, Hoi Kil Choi, Hyun Su Kim, Seong Yun Kim*. Synergistic effect of hybrid graphene nanoplatelet and multi-walled carbon nanotube fillers on the thermal conductivity of polymer composites and theoretical modeling of the synergistic effect. Composites Part A (IF: 3.719) 2016, 88, 79-85.
29.
Hyun Su Kim, Hyun Sung Bae, Jaesang Yu, Seong Yun Kim*. Thermal conductivity of polymer composites with the geometrical characteristics of graphene nanoplatelets. Scientific Reports (IF: 5.228) 2016, 6, 26825.
30.
Hyeongcheol Park, Hana Jung, Jaesnag Yu, Min Park, Seong Yun Kim*. Carbon fiber-reinforced plastics based on epoxy resin toughened with core shell rubber impact modifiers. e-Polymers (IF: 0.812) 2015, 15, 369-375. (Cover article)
31.
Ye Ji Noh, Seong Yun Kim*. Synergistic improvement of thermal conductivity in polymer composites filled with pitch based carbon fiber and graphene nanoplatelets. Polymer Testing (IF: 2.350) 2015, 45, 132-138.
32.
Seong Yun Kim, So-Young Kim, Jisung Choi, Sungho Lee, Seong Mu Jo, Junghoon Joo, Hun-Su Lee*. Two step microwave plasma carbonization including low plasma power pre-carbonization for polyacrylonitile based carbon fiber. Polymer (IF:3.586) 2015, 69, 123-128.
33.
Hyun Su Kim, Ji-un Jang, Jaesang Yu, Seong Yun Kim*. Thermal conductivity of polymer composites based on the length of multi-walled carbon nanotubes. Composites Part B (IF: 3.850) 2015, 79, 505-512.
34.
Hyung Min Kim, Ye Ji Noh, Jaesang Yu, Seong Yun Kim*, Jae Ryoun Youn. Silica aerogel/polyvinyl alcohol (PVA) insulation composites with preserved aerogel pores using interfaces between the superhydrophobic aerogel and hydrophilic PVA solution. Composites Part A (IF: 3.719) 2015, 75, 39-45.
35.
Ye Ji Noh, Han-Ik Joh, Jaesang Yu, Soon Hyoun Hwang, Sungho Lee, Cheol Ho Lee, Seong Yun Kim*, Jae Ryoun Youn. Ultra-high dispersion of graphene in polymer composite via solvent free fabrication and functionalization. Scientific Reports (IF: 5.228) 2015, 5, 9141.
36.
Hyung Min Kim, Hyun Su Kim, Seong Yun Kim*, Jae Ryoun Youn*. Silica aerogel/epoxy composites with preserved aerogel pores and low thermal conductivity. e-Polymers (IF: 0.812) 2015, 15, 111-117.
37.
Seong Yun Kim, Ye Ji Noh, Jaesnag Yu*. Thermal conductivity of graphene nanoplatelets filled composites fabricated by solvent-free processing for the excellent filler dispersion and a theoretical approach for the composites containing the geometrized fillers. Composites Part A (IF: 3.719) 2015, 69, 219-225.
38.
So-Young Kim, Seong Yun Kim, Sungho Lee, Sungmu Jo, Yeon-Ho Im, Hun-Su Lee*. Microwave plasma carbonization for the fabrication of polyacrylonitrile-based carbon fiber. Polymer 2015, 56, 590-595.
39.
Seong Yun Kim, Ye Ji Noh, Jaesang Yu*. Prediction and experimental validation of electrical percolation by applying a modified micromechanics model considering multiple heterogeneous inclusions. Composites Science and Technology (IF: 3.897) 2015, 106, 156-162.
40.
Ye Ji Noh, Han Sang Kim*, Seong Yun Kim*. Carbon nanotube mat reinforced thermoplastic composites with a polymerizable, low-viscosity cyclic Butylene Terephthalate Matrix. Macromolecular Research (IF: 1.357) 2014, 22, 1183-1189.
41.
Sung Ho Kim, Ye Ji Noh, Young Woung Ko, Seong Yun Kim*, Jae Ryoun Youn*. Improved Tensile Strength and Thermal Stability of Thermoplastic Carbon Fiber Fabric Composites by Heat Induced Crystallization of In Situ Polymerizable Cyclic Butylene Terephthalate Oligomers. Polymer Engineering and Science (IF: 1.719) 2014, 54, 2161-2169.
42.
Seong Yun Kim, Ye Ji Noh, Jaesang Yu*. Improved thermal conductivity of polymeric composites fabricated by solvent-free processing for the enhanced dispersion of nanofillers and a theoretical approach for composites containing multiple heterogeneities and geometrized nanofillers. Composites Science and Technology (IF: 3.897) 2014, 101, 79-85.
43.
Ye Ji Noh, Sungho Lee, Seong Yun Kim* Jae Ryoun Youn*. High-speed fabrication of thermoplastic carbon fiber fabric composites with a polymerizable, low-viscosity cyclic butylene terephthalate matrix for automotive application. Macromolecular Research (IF: 1.357) 2014, 22, 528-533. (Cover article)
44.
Hun Su Lee, So-young Kim, Ye Ji Noh, Seong Yun Kim*. Design of microwave plasma and enhanced mechanical poperties of thermoplastic composites reinforced with microwave plasma-treated carbon fiber fabric. Composites Part B (IF: 3.850) 2014, 60, 621-626.
45.
Seong Yun Kim, Ye Ji Noh, Jun Lim, Nam-Ho You*. Silica Aerogel/Polyimide Composites with Preserved Aerogel Pores Using Multi-Step Curing. Macromolecular Research (IF: 1.357) 2014, 22, 108-111.
46.
Ye Ji Noh, Seong Yeol Pak, Soon Hyoung Hwang, Jun Yeon Hwang, Seong Yun Kim*, Jae Ryoun Youn*. Enhanced dispersion for electrical percolation behavior of multi-walled carbon nanotubes in polymer nanocomposites using simple powder mixing and in situ polymerization with surface treatment of the fillers. Composites Science and Technology (IF: 3.897) 2013, 89, 29-37.
47.
Seong Yeol Pak, Seong Yun Kim, Sung Ho Kim*, Jae Ryoun Youn*. Measurement of residaul stresses in polymeric parts by indentation method. Polymer Testing (IF: 2.350) 2013, 32, 946-952.
48.
V. S. Mironov, Seong Yun Kim, Min Park*. Electrical properties of polyethylene composite films filled with nickel powder and short carbon fiber hybrid filler. Carbon Letters (IF: 1.588) 2013, 14, 105-109.
49.
Seong Yeol Pak, Hyung Min Kim, Seong Yun Kim*, Jae Ryoun Youn*. Synergistic improvement of thermal conductivity of thermoplastic composites with mixed boron nitride and multi-walled carbon nanotube fillers. Carbon (IF 6.198) 2012, 50, 4830-4838.
50.
Ye Ji Noh, Han Sang Kim, Seong Yun Kim*. Improved electrical conductivity of a carbon nanotube mat composite prepared by in-situ polymerization and compression molding with compression pressure. Carbon Letters (IF: 1.588) 2012, 13, 243-247.
51.
Seong Yun Kim, Sung Ho Kim, Seong Yeol Pak, Jae Ryoun Youn*. Formation of thermally induced craze and prevention by using infrared radiation annealing method. Journal of Applied Polymer Science (IF: 1.866) 2012, 125, 3029-3037.
52.
Sung Ho Kim, Seong Yun Kim, Seung Hwan, Jae Ryoun Youn*. Residual stresses and thermoviscoelastic deformation of laminated film prepared for film insert molding. Polymer Engineering and Science (IF: 1.719) 2012, 52, 1121-1127.
53.
Seong Yun Kim, Soo Jin Baek, Jae Ryoun Youn*. New hybrid method for simultaneous improvement of tensile and impact properties of carbon fiber reinforced composites. Carbon (IF 6.198) 2011, 49, 5329-5338.
54.
Soo Jin Paek, Seong Yun Kim, Jae Ryoun Youn*, Kyeong Wung Kim. Warpage and mechanical properties of film insert molded parts with composite substrate. Fibers and Polymers (IF 1.022) 2011, 12, 927-931.
55.
Jin Young Kim, Seong Yun Kim, Young Seok Song, Jae Ryoun Youn*. Relationship between the crystallization behavior and the warpage of film-insert-molded parts. Journal of Applied Polymer Science (IF: 1.866) 2011, 120, 1539-1546.
56.
Hwa Jin Oh, Young Seok Song, Sung Ho Kim, Seong Yun Kim, Jae Ryoun Youn*. Fluid-structure interaction analysis on the film wrinkling problem of a film insert molded part. Polymer Engineering and Science (IF: 1.719) 2011, 51, 812-818.
57.
Seong Yun Kim, Sung Ho Kim, Hwa Jin Oh, Seung Hwan Lee, Jae Ryoun Youn*. Residual stress and viscoelastic deformation of film insert molded automotive parts. Journal of Applied Polymer Science (IF: 1.866) 2010, 118, 2530-2540.
58.
Seong Yun Kim, Kook Seung Shin, Seung Hwan Lee, Kyeong Wung Kim, Jae Ryoun Youn*. Unique crystallization behavior of multi-walled carbon nanotube filled poly(lactic acid). Fibers and Polymers (IF 1.022) 2010, 11, 1018-1023.
59.
Seong Yun Kim, Jin Young Kim, Sung Ho Kim, Seung Hwan Lee, Jae Ryoun Youn*. Sung Hee Lee, Kyeong Wung Kim, Numerical flow analysis on warpage of film insert molded parts with fiber reinforced polymer substrate. Korea-Australia Rheology Journal (IF: 1.014) 2010, 22, 179-186.
60.
Seung Hwan lee, Sheong Hyun Choi, Seong Yun Kim, Jae Ryoun Youn*. Effects of thermal imidization on mechanical properties of poly(amide-co-imide)/multiwalled carbon nanotube composite films. Journal of Applied Polymer Science (IF: 1.866) 2010, 117, 3170-3180.
61.
Seung Hwan Lee, Sheong Hyun Choi, Seong Yun Kim, Jin Il Choi, Jae Rock Lee, Jae Ryoun Youn*. Degradation and dynamic properties of poly(amide-co-imide)/carbon nanotube composite films. Polymers & Polymer Composites (IF: 0.256) 2010, 18, 381-389.
62.
Seung Hwan Lee, Jeong Hwa Han, Seong Yun Kim, Jae Ryoun Youn*, Young Seok Song. Compression and relaxation behavior of dry fiber preforms for resin transfer molding. Journal of Composite Materials (IF: 1.242) 2010, 44, 1801-1820.
63.
Sung Hee Lee, Seong Yun Kim, Jae Ryoun Youn*, Baek Jin Kim. Warpage of a large-sized orthogonal stiffened plate produced by injection molding and injection compression molding. Journal of Applied Polymer Science (IF: 1.866) 2010, 116, 3460-3467.
64.
Doo Jin Lee, Myung Wook Kim, Seong Yun Kim, Seung Hwan Lee, Jae Ryoun Youn*. Three dimensional flow simulation and structural analysis on stiffness of fiber reinforced anisotropic parts. Korea-Australia Rheology Journal (IF: 1.014) 2010, 22, 95-103.
65.
Seong Yun Kim, Jung Tae Lee, Jin Young Kim, Jae Ryoun Youn*. Effects of film and substrate dimensions on warpage of film insert molded parts. Polymer Engineering and Science (IF: 1.719) 2010, 50, 1205-1213.
66.
S. Y. Kim, S. H. Lee, J. R. Youn*. Warpage of film insert molded parts and optimum processing conditions. International Polymer Processing 2010, XXV, 109-117.
671.
Seung Hwan Lee, Seong Yun Kim, Jae Ryoun Youn*, Dong Gi Seong, Seung Yong Jee, Jin IL Choi, Jae Rock Lee*. Processing of continuous poly(amide-imide) nanofibers by electrospinning. Polymer International (IF: 2.414) 2010, 59, 212-217.
68.
Seung Hwan lee, Mei Yang, Young Seok Song, Seong Yun Kim, Jae Ryoun Youn*. Three-dimensional flow simulation of resin transfer molding utilizing multilayered fiber preform. Journal of Applied Polymer Science (IF: 1.866) 2009, 114, 1803-1812.
69.
Seung Hwan Lee, Seong Yun Kim, Jae Ryoun Youn*. Rheological behavior and theoretical modeling of uniaxial elongational flow properties of polypropylene/layered silicate nanocomposites. Polymer Composites (IF: 2.004) 2009, 30, 1426-1436.
70.
Seong Yun Kim, Chae Hwan Kim, Sung Ho Kim, Hwa Jin Oh, Jae Ryoun Youn*. Measurement of residual stresses in film insert molded parts with complex geometry. Polymer Testing (IF: 2.350) 2009, 28, 500-507.
71.
Seung Hwan Lee, Seong Yun Kim, Jae Ryoun Youn*. Effects of maleination and heat treatment on morphology and dynamic mechanical thermal behavior of polypropylene/organoclay nanocomposites. Composites Part A (IF: 3.719) 2009, 40, 968-974.
72.
Seong Yun Kim, Seong Hun Kim, Seung Hwan Lee, Jae Ryoun Youn*. Internal structure and physical properties of thermotropic liquid crystal polymer/poly(ethylene 2,6-naphthalate) composite fibers. Composites: Part A (IF: 3.719) 2009, 40, 607-612.
73.
Seung Hwan lee, Jong Hyuk Kim, Sheong Hyun Choi, Seong Yun Kim, Kyeong Wung Kim, Jae Ryoun Youn*. Effects of filler geometry on internal structure and physical properties of polycarbonate composites prepared with vaious carbon fillers. Polymer International (IF: 2.414) 2009, 58, 354-361.
74.
Seong Yun Kim, Sung Ho Kim, Hwa Jin Oh, Seung Hwan Lee, Soo Jin Baek, Jae Ryoun Youn, Sung Hee Lee, Sun-Woo Kim. Molded Geometry and Viscoelastic Behavior of Film Insert Molded Parts. Journal of Applied Polymer Science 2009, 111, 642-650.
75.
Soo Jin Baek, Seong Yun Kim, Seung Hwan Lee, Jae Ryoun Youn*, Sung Hee Lee. Effect of processing conditions on warpage of film insert molded parts. Fibers and Polymers (IF: 1.022) 2008, 9, 747-754.
76.
Seong Yun Kim, Seung Hwan Lee, Soo Jin Baek, Jae Ryoun Youn. Thermoviscoelastic Behavior of Film-Insert-Molded Parts Prepared under Various Processing Conditions. Macromolecular Materials and Engineering (IF: 2.834) 2008, 293, 969-978 (Cover article).
77.
Seong Yun Kim, Hwa Jin Oh, Sung Ho Kim, Chae Hwan Kim, Seung Hwan Lee, Jae Ryoun Youn. Prediction of Residual Stress and Viscoelastic Deformation of Film Insert Molded Parts. Polymer Engineering and Science 2008, 48, 1840-1847.
78.
Seong Yun Kim, Jun Young Kim, Seong Hun Kim. Structure and Properties of Thermotropic Liquid Crystal Polymer and Poly(ethylene 2,6-naphthalate) Blend Fibers. Polymer International 2008, 57, 378-384.
79.
Seong Yun Kim, Seong Hun Kim, Jun Young Kim, Hyun Hok Cho. Novel CO2 Laser Drawing of Thermotropic Liquid Crystal Polymer and Poly(ethylene2,6-naphthalate) Blend Fibers. Journal of Applied Polymer Science 2007, 104,205-211.